- Home
- >
- Products
- >
- Jaw Crusher
- >
- Jaw Crusher Parts
Jaw Crusher Parts
Brand :ZHUOYUE
Product origin :Shenyang, Liaoning, China
Delivery time :Two month
Supply capacity :10 cases per year
1.Cone Crusher clamp rod Superior Durability & Environmental Adaptability, Significantly Reducing Operation and Maintenance Costs
2.Cone Crusher mandible Ultra-high Machining Accuracy & Perfect Compatibility, Optimizing Equipment Operation Performance
3.Cone Crusher Copper parts Convenient and Efficient Installation & Replacement, Comprehensively Improving Working Efficiency
Product Introduction
A jaw crusher is a system: moving jaw, clamp rod, copper bushing, lock nut, toggle plate, and wear plates must work together. The real problem is not one part failing, but parts from different sources not fitting together.
The moving jaw comes from one supplier, the clamp rod from another, the copper bushing from a third, and the lock nut is reused. Each part may pass inspection, but on assembly the threads don’t match, bushing clearance is wrong, or the lock nut doesn’t seat. The result is overheating, vibration, loosening, repeated disassembly, re-ordering, and unplanned downtime—often during peak production.
Our Solution: Component Matching Before Production
ZHUOYUE treats the moving jaw, clamp rod, copper bushing, and lock nut as one matched assembly, not as separate parts. Before production, we measure the interfaces that actually touch each other and produce all parts against one confirmed baseline.
This delivers concrete value:
Fit the first time – jaw bore, rod seating surface, and nut contact face are measured together, so the assembly goes in without re-machining.
Run through peak season – bushing clearance is confirmed against the shaft journal before shipment, not discovered during startup.
Avoid thread damage and loosening – clamp rod and lock nut threads are matched by pitch, major diameter, and form, not left to chance.
Reorder once, not three times – parts ship as one matched set, so you don’t open the crusher again to find the right combination.
Cut teardown cost – fewer rework cycles means less crane time, less labor, and less lost output on every rebuild.
Where required, parts are trial-fitted before shipment. This does not eliminate all assembly risk. It removes the risk that comes from parts never checked against each other.
Technical parameters
| Parameter | Specification |
|---|---|
| Product Range | Moving jaw, clamp rod, copper bushing, lock nut, and related jaw crusher wear parts |
| Moving Jaw Material | Mn13Cr2 / Mn18Cr2 |
| Moving Jaw Hardness | Mn13Cr2: HB 180–220 (surface up to HB 450–550 after work hardening); Mn18Cr2: HB 200–230 |
| Moving Jaw Impact Toughness | Mn13Cr2: ≥150 J/cm²; Mn18Cr2: ≥120 J/cm² |
| Moving Jaw Heat Treatment | Water toughening |
| Clamp Rod Material | 42CrMo / 40Cr |
| Clamp Rod Thread | Metric / UNC / UNF / BSP; tolerance class 6g / 6H |
| Clamp Rod Surface Treatment | Anti-rust coating or plating; type and thickness according to confirmed requirement |
| Copper Bushing Material | CuPb15Sn8 / CuAl10Fe3 |
| Copper Bushing Hardness | CuPb15Sn8: HB 60–90; CuAl10Fe3: HB 100–140 |
| Copper Bushing Clearance | 0.10–0.25 mm according to model and operating conditions |
| Lock Nut Material | 42CrMo / 40Cr |
| Lock Nut Thread | Matched to clamp rod thread; tolerance class 6H |
| Machining Tolerance | ±0.02 mm for critical mating dimensions; ±0.05 mm for general dimensions |
| Surface Roughness | Ra ≤ 1.6 μm for mating surfaces |
| Inspection | Dimensional per ISO 2768-1; hardness per ISO 6506-1 / ASTM E10; thread gauge check; assembly compatibility check where required |
| Documentation | Material certificate, dimensional inspection report, heat treatment record, thread inspection record |
| Third-party Inspection | SGS / Bureau Veritas / customer-appointed inspector on request |
Product Features
1. Matched assembly, not separate parts
Moving jaw, clamp rod, copper bushing, and lock nut are confirmed against one dimensional baseline. Mating dimensions, thread fit, and assembly clearance are checked before production.
2. Material selected for the application
Moving jaw material is confirmed according to feed abrasiveness and impact conditions. Copper bushing material is confirmed according to load and lubrication conditions. Clamp rod and lock nut material is confirmed according to load and thread requirements.
3. Thread and fit control
Clamp rod and lock nut threads are matched and checked with thread gauges. Bushing inner and outer diameters are measured against the confirmed shaft journal and housing bore.
4. Traceable inspection
Material certificates, dimensional inspection records, and thread inspection records can be provided according to order requirements. Batch traceability covers raw material, production, heat treatment, and inspection.
5. Spare parts supply
Wear parts and common spare parts can be supplied under a long-term framework agreement. Spare parts lead time is confirmed according to stock status and production schedule.
| Model | Original Image Number | Product Name | single weight |
| CH420 | 442.9674-00 | Upper frame assembly | 1195 |
| CH420 | 442.9554-00 | Upper frame | 1000 |
| CS420 | 442.8366-01 | Upper frame | 1565 |
| CH430 | 442.7981-00 | Upper frame | 1752 |
| CS430 | 442.8446-01 | Upper frame | 2795 |
| CS430 | 452.6913-001 | Upper frame | 2760 |
| CH440 | 442.7180-01 | Upper frame | 2877 |
| CS440 | 442.8059-01 | Upper frame | 5089 |
| CS440 | 452.6202-001 | Upper frame | 4961 |
| CH660 | 442.9037-01 | Upper frame | 4956 |
| CH660 | 452.3760-001 | Upper frame | 4856 |
| CS660 | 442.8969-01 | Upper frame | 4591 |
| CS660 | 442.8970-01 | Upper frame | 5489 |
| CH870 | 452.0664-001 | Upper frame | 8357 |
| CH880 | 452.5427-001 | Upper frame | 14568 |
| CH880 | 452.3319-001 | Upper frame | 13017 |
| CH86X | BG00137198 | Upper frame | 6855 |
| CH865i | 452.7777-001 | Upper frame | 7141 |
| CH895 Tertiary | 452.5816-001 | Upper frame | 16821 |
| CH890/CH895 | 452.6236-001 | Upper frame | 14130 |
| CH420 | 442.8362-01 | Boom cap | 70 |
| CS430 | 442.8520-00 | Boom cap | 140 |
| CS430 | 442.8521-01 | Wear ring | 41.78 |
| CH430 | 442.7976-01 | Boom cap | 97 |
| CH440 | 442.7492-01 | Boom cap | 155 |
| CS440 | 442.9164-00 | Boom cap | 306 |
| CS440 | 442.9164-01 | Boom cap | 177 |
| CS440 | 442.9165-01 | Wear ring | 129 |
| CH660 | 442.8753-01 | Boom cap | 325 |
| CH660 | 452.3841-001 | Boom cap | 340 |
| CS660 | 442.8977-01 | Boom cap | 416 |
| CH870 | 452.0553-001 | Boom cap | 606 |
| CH880 | 452.0266-001 | Boom cap | 978 |
| CH550 | 452.8314-001 | Boom cap | 198 |
| CH550 | 452.7280-001 | Boom cap | 218 |
| CH86X | 452.7702-001 | Boom cap | 368 |
| CH420 | 442.8363-01 | Boom bushing | 16 |
| CH430 | 442.6473-01 | Boom bushing | 34.5 |
| CH440 | 442.9408-01 | Boom bushing | 68 |
| CH660 | 442.8754-01 | Boom bushing | 87 |
| CH870 | 452.1619-001 | Boom bushing | 140 |
| CH880 | 442.9266-01 | Boom bushing | 185 |
| CH540 | BG00131644 | Boom bushing | 40 |
| CH550 | 452.7547-001 | Boom bushing | 73 |
| CH860/CH865i | 452.7654-001 | Boom bushing | 90 |
| CH420 | 442.9568-01 | Boom guard plate | 15 |
| CS420 | 442.6798-00 | Boom guard plate | 65 |
| CH430 | 442.7984-01 | Boom guard plate | 32 |
| CS430 | 452.6113-001 | Boom guard plate | 135 |
| CS430 | 442.8451-01 | Boom guard plate | 137 |
| CH440 | 442.7190-01 | Boom guard plate | 45 |
| CS440 | 442.8075-00 | Boom guard plate | 240 |
| CS440 | 452.6200-001 | Boom guard plate | 243 |
| CH660 | 442.8812-01 | Boom guard plate | 74 |
| CS660 | 442.8976-01 | Boom guard plate | 522 |
| CH870 | 452.1060-001 | Boom guard plate | 152 |
| CH880 | 442.9265-00 | Boom guard plate | 305 |
| CH880 | 452.0514-001 | Boom guard plate | 703 |
| CH550 | BG00204330 | Boom guard plate | 84 |
| CH890/CH895 | 452.5841-001 | Boom guard plate | 596 |
| CS430 | 442.9035-01 Mn13 | Upper frame guard plate | 43 |
| CS430 | 442.9035-01 Mn18 | Upper frame guard plate | 43 |
| CS440 | 442.9036-01 Mn13 | Upper frame guard plate | 69 |
| CS440 | 442.9036-01 Mn18 | Upper frame guard plate | 69 |
| CH660 | 442.9415-00 | Wear plate | 30 |
| CH660 | 442.9415-00T | Wear plate | 30 |
| CS660 | 442.8975-01 Mn13 | Upper lining plate | 63 |
| CS660 | 442.8975-01 Mn18 | Upper lining plate | 63 |
| CH870 | 452.0710-901 | Wear plate | 130 |
| CH870 | 452.0710-901T | Wear plate | 130 |
| CH880 | 452.1069-901 | Wear plate | 103 |
| CH880 | 452.1069-901T | Wear plate | 103 |
| CH420 | 442.8364-01 | Boom oil seal | 0.45 |
| CH430 | 442.6470-01 | Boom oil seal | 0.5 |
| CH440 | 442.7193-01 | Boom oil seal | 1 |
| CH660 | 442.8755-01 | Boom oil seal | 1.5 |
| CH870 | 452.1599-001 | Boom arm oil seal | 1.3 |
| CH880 | 452.0418-001 | Boom arm oil seal | 2 |
| CH540 | BG00175563 | Boom arm oil seal | 1 |
| CH550 | 452.7519-001 | Boom arm oil seal | 0 |
| CH86X | 452.7656-001 | Boom arm oil seal | 1.3 |
| CH420 | 442.9571-00 | Frame pin | 0.4 |
| CH440/CH660/CH870/CH880 | 442.8290-01 | Frame pin | 0.7 |
| CS440 | 442.8077-01 | Frame pin | 0.2 |
| CH420 | 442.9570-01 | Support ring | 46 |
| CS430 | 452.7008-001 | Support ring | 81 |
| CH440 | 442.8425-01 | Support ring | 139 |
| CS440 | 452.6263-001 | Support ring | 103 |
| CH660 | 442.8793-01 | Support ring | 177 |
| CS660 | 452.5839-001 | Support ring | 137 |
| CH870 | 452.0687-001 | Support ring | 450 |
| CH880 | 442.9313-01 | Support ring | 396 |
| CH86X | 452.8403-001 | Support ring | 198 |
| CH420 | 442.9596-01 | Filler ring | 200 |
| CH430 | 442.8245-01 | Filler ring | 298 |
| CH430 | 442.8008-01 | Filler ring | 577 |
| CH440 | 442.7485-01 | Filler ring | 597 |
| CH440 | 442.7484-01 | Filler ring | 384 |
| CH660 | 442.8823-01 | Filler ring | 573 |
| CH660 | 442.8863-01 | Filler ring | 1146 |
| CH870 | 452.2269-901 | Filler ring | 1078 |
| CH870 | 452.0898-901 | Filler ring | 1177 |
| CH870 | 452.0891-901 | Filler ring | 592 |
| CH880 | 442.9520-00 | Filler ring | 1896 |
| CH880 | 442.9338-01 | Filler ring | 2928 |
| CH880 | 442.9332-00 | Filler ring | 3687 |
| CH540 | BG00248423 | Filler ring | 399 |
| CH550 | 452.7388-001 | Filler ring | 422 |
| CH870 | 452.0550-001 | Retaining ring | 3 |
| CH880 | 452.0419-001 | Retaining ring | 6.1 |
| CH870 | 452.0549-001 | Steel pipe | 6 |
| CH880 | 452.0417-001 | Steel pipe | 5.4 |
| CH420 | 442.9595-01 | Ring | 21.4 |
| CH430 | 442.8010-01丁晴 | O-ring | 0.5 |
| CH430 | 442.8010-01氟胶 | O-ring | 0.5 |
| CH440 | 442.7251-03 | Ring | 1 |
| CH660 | 442.8881-01 | Ring | 2 |
| CH420 | 442.9614-01丁晴 | Gasket | 0.3 |
| CH420 | 442.9614-01氟胶 | Gasket | 0.3 |
| CH420 | 442.9573-01 | Gasket | 0.12 |
| CH430 | 442.7997-01 | Gasket | 0 |
| CH440 | 442.7251-02 | Gasket | 2 |
| CH440 | 442.7251-01 | Gasket | 2 |
| CH440/CH660 | 442.7271-01 | Gasket | 0.3 |
| CH870 | 442.9354-01 | Gasket | 0.62 |
| CH430 | 442.8009-01 | Pad | 33 |
| CH440/CH660/CH880 | 442.7252-01 | Pad | 0.05 |
| CH440/CH660/CH880 | 442.7252-02 | Pad | 0.03 |
| CH440/CH660/CH880 | 442.7252-03 | Pad | 0.06 |
| CH440/CH660/CH880 | 442.7252-04 | Pad | 0.09 |
| CH430 | 442.7999-01 | Pipe | 0.5 |
| CH440 | 442.8908-03 | Pipe | 0 |
| CS440 | 442.8078-01 | Pipe | 0.1 |
| CH660 | 442.8908-01 | Pipe | 0 |
| CH880 | 442.8908-02 | Pipe | 0 |
| CS440 | 452.6197-001 | Pin | 0.2 |
| CH430 | 442.8695-00 | Wear ring | 6 |
| CH870 | 452.1369-901 | Wear ring | 0 |
| CH430 | 442.8001-01 | Bolt | 1.3 |
| CH440 | 442.8687-01 | Bolt | 2 |
| CH870 | 452.2201-001 | Bolt | 0 |
| CH420 | 442.9572-01 | Bushing | 0.2 |
| CH430 | 442.7996-01 | Bushing | 0.25 |
| CH440/CH660 | 442.7253-01 | Bushing | 0.4 |
| CH870/CH880 | 442.9353-01 | Bushing | 0.9 |
| CH420 | 452.6807-901 | Lower frame assembly | 1592 |
| CH430 | BG00571835 | Lower frame assembly | 2550 |
| CH440 | 452.0230-901 | Lower frame assembly | 4036 |
| CH660 | 452.4125-901 | Lower frame assembly | 7884 |
| CH870 | 452.0697-901 | Lower frame assembly | 15729 |
| CH880 | 452.2043-901 | Lower frame assembly | 20584 |
| CH880 | 452.0642-901 | Lower frame assembly | 18335 |
| CH840i/CS840i/CH550/CS550 | 452.8354-901 | Lower Frame Assembly | 5909 |
| CH860/CH865 | BG00134129 | Lower Frame Assembly | 11973 |
| CH89X | 452.5824-901 | Lower Frame Assembly | 22699 |
| CH420 | 442.9871-00 | Lower Frame | 1433 |
| CH430 | 442.7908-00 | Lower Frame | 2300 |
| CH430/CS430 | 452.6866-001 | Lower Frame | 2433 |
| CH440 | 452.0231-001 | Lower Frame | 4026 |
| CH440 | 452.0231-001(A) | Lower Frame | 3906 |
| CH660 | 452.3765-001 | Lower Frame | 5900 |
| CH660 | 442.8735-01 | Lower Frame | 6400 |
| CH870 | 452.0675-001 | Lower Frame | 12700 |
| CH880 | 452.0281-001 | Lower Frame | 0 |
| CH830i/CS830i/CH540/CS540 | BG00219868 | Lower Frame | 2866 |
| CH860/CH865i | 452.8486-001 | Lower Frame | 10103 |
| CH890/CH895 | 452.5805-001 | Lower Frame | 19804 |
| CH660 | 452.4297-901 | Leg Assembly | 316 |
| CH660 | 442.8756-01 | Leg | 78 |
| CH660 | 452.4982-901 | Leg | 81 |
| CH660 | 452.4983-901 | Leg | 81 |
| CH870 | 452.1980-901 | Leg Assembly | 835 |
| CH880 | 452.3720-901 | Leg Assembly | 0 |
| CH870/CH880 | 452.1064-001 | Leg | 204 |
| CH870 | 452.0977-001 | Leg | 201 |
| CH870 | 452.0977-002 | Leg | 201 |
| CH880 | 452.3721-901 | Leg Assembly | 816 |
| CH880 | 442.9749-01 | Leg | 420 |
| CH420/CH430/CH440/CH660/CH870/CH880 | 442.7907-01 | Block | 0.23 |
| CH420 | 442.6174-01 | Horizontal Shaft Liner | 23 |
| CH430 | 442.7915-01 | Horizontal Shaft Liner | 35 |
| CH440 | 442.7140-01 | Horizontal Shaft Liner | 53 |
| CH660 | 442.8760-01 | Horizontal Shaft Liner | 65 |
| CH660 | 452.5222-01 | Horizontal Shaft Liner | 102 |
| CH870 | 452.1066-901 | Horizontal Shaft Liner | 238 |
| CH880 | 452.0317-901 | Horizontal Shaft Liner | 232 |
| CH420 | 442.6175-01 | Saddle Liner | 18 |
| CH430 | 442.7914-01 | Saddle Liner | 27 |
| CH440 | 442.7141-01 | Saddle Liner | 49 |
| CH660 | 442.8759-01 | Saddle Liner | 60 |
| CH660 | 452.5227-01 | Saddle Liner | 90 |
| CH870 | 452.1065-901 | Saddle Liner | 210 |
| CH880 | 452.0314-901 | Saddle Liner | 246 |
| CH420 | 442.6131-01 | Lower Frame Bushing | 43 |
| CH430 | 452.4190-001 | Lower Frame Bushing | 62 |
| CH430 | 442.7935-01 | Lower Frame Bushing | 62 |
| CH440 | 442.7146-01 | Lower Frame Bushing | 103 |
| CH660 | 442.8742-01 | Lower Frame Bushing | 171 |
| CH870 | 452.0795-001 | Lower Frame Bushing | 255 |
| CH880 | 442.9248-01 | Lower Frame Bushing | 375 |
| CH540 | BG00203559 | Lower Frame Bushing | 55 |
| CH550 | 452.7276-001 | Lower Frame Bushing | 88 |
| CH86X | 452.7644-001 | Lower Frame Bushing | 240 |
| CH420 | 442.6564-00 | Inspection Window | 0 |
| CH430/CH440/CH660/CH870 | 442.7201-00 | Inspection Window | 6 |
| CH420 | 442.6132-01 | Dustproof Cylinder | 67 |
| CH430 | 442.7929-01 | Dustproof Cylinder | 104.3 |
| CH440 | 442.7106-01 | Dustproof Cylinder | 174 |
| CH660 | 452.4151-001 | Dustproof Cylinder | 278 |
| CH660 | 442.8741-01 | Dustproof Cylinder | 296 |
| CH870 | 452.0926-00 | Dustproof Cylinder | 440 |
| Overpressure 870 | BG00866668 | Dustproof Cylinder | 611 |
| CH880 | 442.9307-01 | Dustproof Cylinder | 594 |
| CH540 | BG00220326 | Dustproof Cylinder | 139 |
| CH86X | 452.7595-001 | Dustproof Cylinder | 492 |
| CH890/895 | 452.6435-001 | Dustproof Cylinder | 0 |
| CH89X | 452.6055-001 | Dustproof Cylinder | 895 |
| CH430 | 442.7932-01 | Ring | 8.6 |
| CH440 | 442.7109-01 | Ring | 15.47 |
| CH660 | 442.8744-01 | Ring | 17 |
| CH870 | 452.0999-001 | Ring | 16.9 |
| CH880 | 442.9309-01 | Ring | 25.6 |
| CH420 | 442.6143-01 | Positioning block | 1 |
| CH430 | 452.4194-001 | Positioning block | 1.5 |
| CH430 | 442.7928-01 | Positioning block | 1.5 |
| CH440 | 442.7110-01 | Positioning block | 3 |
| CH660 | 442.8762-01 | Positioning block | 3 |
| CH870 | 452.0834-001 | Positioning block | 3 |
| CH880 | 442.9308-01 | Positioning block | 3 |
| CH86X | BG00137662 | Positioning block | 3.1 |
| CH420 | 442.6146-01 | Inner seal ring | 1.36 |
| CH430 | 442.7931-01 | Inner seal ring | 1.3 |
| CH440 | 442.7108-01 | Inner seal ring | 10 |
| CH660 | 442.8747-01 | Inner seal ring | 2 |
| CH870 | 452.1000-001 | Inner seal ring | 5.5 |
| CH880 | 442.9310-01 | Inner seal ring | 3.9 |
| CH420 | 442.6212-01 | Pad | 0 |
| CH420 | 442.6212-02 | Pad | 0 |
| CH420 | 442.6212-03 | Pad | 0 |
| CH420 | 442.6212-04 | Pad | 0 |
| CH420 | 442.6212-05 | Pad | 0 |
| CH430 | 442.7933-01 | Pad | 0.1 |
| CH430 | 442.7933-02 | Pad | 0.1 |
| CH430 | 442.7933-03 | Pad | 0.1 |
| CH430 | 442.7933-04 | Pad | 0.5 |
| CH440 | 442.7168-01 | Pad | 0.1 |
| CH440 | 442.7168-02 | Pad | 0.1 |
| CH440 | 442.7168-03 | Pad | 0.1 |
| CH440 | 442.7168-04 | Pad | 0.2 |
| CH660 | 442.8809-01 | Pad | 0.1 |
| CH660 | 442.8809-02 | Pad | 0.1 |
| CH660 | 442.8809-03 | Pad | 0.1 |
| CH660 | 442.8809-04 | Pad | 0.1 |
| CH870 | 452.1279-001 | Pad | 0.1 |
| CH870 | 452.1279-002 | Pad | 0.1 |
| CH870 | 452.1279-003 | Pad | 0.1 |
| CH870 | 452.1279-004 | Pad | 1 |
| CH880 | 442.9362-01 | Pad | 0.1 |
| CH880 | 442.9362-02 | Pad | 0.1 |
| CH880 | 442.9362-03 | Pad | 0.1 |
| CH880 | 442.9362-04 | Pad | 0.1 |
| CH420 | 442.6216-01 | Spacer | 0.04 |
| CH430 | 442.7934-01 | Spacer | 0.1 |
| CH440 | 442.7170-01 | Spacer | 0.2 |
| CH660 | 442.8808-01 | Spacer | 0.1 |
| CH870 | 452.1267-001 | Spacer | 0 |
| CH880 | 442.9363-01 | Spacer | 0.1 |
| CH420 | 442.6243-01 | Bolt | 0.9 |
| CH420 | 442.9529-01 | Bolt | 0.9 |
| CH430 | 442.9529-02 | Bolt | 1 |
| CH440 | 442.7243-01 | Bolt | 1 |
| CH660 | 442.9530-01 | Bolt | 1.62 |
| CH660 | 442.9530-02 | Bolt | 1.96 |
| CH870/CH880 | 442.9530-03 | Bolt | 0 |
| CH420 | 442.7591-901 | Spindle assembly | 936 |
| CS420 | 442.6816-00 | Spindle assembly | 1105 |
| CH430 | 442.8313-00 | Spindle assembly | 1710 |
| CS430 | 452.6149-901 | Spindle assembly | 2070 |
| CH440 | 442.7259-00 | Spindle assembly | 2770 |
| CS440 | 452.1699-902 | Spindle assembly | 3608 |
| CH660 | 452.4130-902 | Spindle assembly | 4699 |
| CS660 | 442.4222-901 | Spindle assembly | 5711 |
| CH870 | 452.0917-901 | Spindle assembly | 9137 |
| CH880 | 452.4305-901 | Spindle assembly | 14185 |
| CH420 | 442.7450-01 | Spindle | 464 |
| CH420 | BG00325122 | Spindle | 461 |
| CS420 | 442.6777-01 | Spindle | 572 |
| CS420 | BG00325124 | Spindle | 580 |
| CH430 | 442.7902-01 | Spindle | 747 |
| CH430 | BG00215620 | Spindle | 747 |
| CS430 | 452.0651-001 | Spindle | 980 |
| CS430 | 452.6119-001 | Spindle | 957 |
| CH440 | 442.7100-01 | Spindle | 1267 |
| CH440 | BG00215580 | Spindle | 1269 |
| CS440 | 452.1633-01 | Spindle | 1685 |
| CS440 | BG00322597 | Spindle | 1688 |
| CH660 | 452.4309-001 | Spindle | 2003 |
| CH660 | 452.3274-001 | Spindle | 1964 |
| CH660 | 442.8767-01 | Spindle | 2096 |
| CH660 | BG00324843 | Main shaft | 2002 |
| CS660 | 452.1638-001 | Main shaft | 2605 |
| CS660 | BG00323462 | Main shaft | 2605 |
| CH870 | 452.0918-001 | Main shaft | 3925 |
| CH870i | BG00433457 | Main shaft | 3851 |
| CH880 | 452.0328-001 | Main shaft | 6030 |
| CH880 | 452.6189-001 | Main shaft | 6069 |
| CH550 | BG00475855 | Main shaft | 1604 |
| CH860/CH865i | BG00133384 | Main shaft | 2930 |
| CH420 | 442.6140-01 | Spindle bushing | 12.25 |
| CH420 | BG00325408 | Spindle bushing | 15.42 |
| CH430 | 442.7913-01 | Spindle bushing | 25 |
| CH430 | BG00215626 | Spindle bushing | 26 |
| CH440 | 442.7117-01 | Spindle bushing | 39 |
| CH440 | BG00213813 | Spindle bushing | 36 |
| CH660 | 442.8792-01 | Spindle bushing | 82 |
| CH660 | BG00325390 | Spindle bushing | 82 |
| CH870 | 452.0505-001 | Spindle bushing | 148 |
| CH880 | 442.9294-01 | Spindle bushing | 190 |
| CH540 | BG00203694 | Spindle bushing | 35 |
| CH550 | 452.7542-001 | Spindle bushing | 60 |
| CH860i | 452.7598-001 | Spindle bushing | 101 |
| CH840i/CS840i/CH550/CS550 | BG00475833 | Spindle bushing | 61 |
| CH420 | 442.7449-01 | Body | 446 |
| CS420 | 442.8882-01 | Body | 454 |
| CH430 | 442.7910-01 | Body | 822 |
| CS430 | 452.0632-001 | Body | 945 |
| CS430 | 452.6121-001 | Body | 977 |
| CH440 | 442.8332-01 | Body | 1271 |
| CS440 | 452.1634-01 | Body | 1715 |
| CS440 | 442.8063-01 | Body | 1621 |
| CH660 | 452.4311-001 | Body | 2290 |
| CH660 | 442.8763-01 | Body | 2495 |
| CS660 | 442.8974-01 | Body | 2715 |
| CS660 | 452.1639-001 | Body | 2681 |
| CH870 | 452.0919-001 | Body | 4555 |
| CH870 | 452.4428-001 | Body | 0 |
| CH880 | 452.0320-001 | Body | 6990 |
| CH880 | 452.4292-001 | Body | 7356 |
| CH550 | 452.7221-001 | Body | 1453 |
| CH860/CH865i | BG00136443 | Body | 2985 |
| CH89X | 452.6424-001 | Body | 6972 |
| CH420 | 442.6193-01 | Inner nut | 4.5 |
| CH430 | 442.7918-01 | Inner nut | 8 |
| CH440 | 442.8333-01 | Inner nut | 19 |
| CH660 | 442.8791-01 | Inner nut | 26 |
| CH870 | 452.0930-001 | Inner nut | 61 |
| CH880 | 442.9269-01 | Inner nut | 56.4 |
| CH420 | 442.6194-01 | Lock nut | 20.5 |
| CH430 | 442.7912-01 | Lock nut | 25 |
| CH440 | 442.7105-01 | Lock nut | 50 |
| CH660 | 442.8800-01 | Lock nut | 80 |
| CH870 | 452.0936-001 | Lock nut | 167 |
| CH880 | 442.9270-001 | Lock nut | 261 |
| CH540 | BG00162964 | Lock nut | 27 |
| CH550 | 452.7347-001 | Lock nut | 0 |
| CH86X | 452.7591-001 | Lock nut | 80 |
| CH420 | 442.6217-01 | Cutting ring | 0.9 |
| CH430 | 442.7911-01 | Cutting ring | 1.8 |
| CH440 | 442.7115-01 | Cutting ring | 4 |
| CH660 | 452.0269-001 | Cutting ring | 4.2 |
| CH870 | 452.0938-001 | Cutting ring | 5.2 |
| CH880 | 442.9306-01 | Cutting ring | 7.2 |
| CH540 | BG00167691 | Cutting ring | 2 |
| CH550 | 452.7467-001 | Cutting ring | 4 |
| CH86X | 452.7593-001 | Cutting ring | 4.3 |
| CH420 | 442.6906-01 | Dust seal | 4 |
| CH430 | 442.8017-01 | Dust seal | 7.3 |
| CH440 | 442.7102-01 | Dust seal | 13 |
| CH660 | 442.8802-01 | Dust seal | 13 |
| CH870 | 452.0924-001 | Dust seal | 36 |
| CH880 | 442.9271-01 | Dust seal | 44 |
| CH540 | BG00195452 | Dust seal | 10 |
| CH550 | 452.7531-001 | Dust seal | 18 |
| CH86X | BG00663894 | Dust seal | 21 |
| CH860i | BG00136795 | Dust seal | 4 |
| CH89X | BG00663893 | Dust seal | 46 |
| CH420 | 442.6141-01 | Support ring | 23.5 |
| CH430 | 442.8020-01 | Support ring | 55 |
| CH440 | 442.7103-01 | Support ring | 80 |
| CH660 | 442.8801-01 | Support ring | 93 |
| CH870 | 452.0921-001 | Support ring | 226 |
| CH880 | 442.9272-01 | Support ring | 192.6 |
| CH540 | BG00220322 | Support ring | 85 |
| CH550 | 452.7329-001 | Support ring | 76 |
| CH860/CH865 | BG00498461 | Support ring | 131 |
| CH890/CH895 | 452.6045-001 | Support ring | 376 |
| CH420 | 442.6931-01 | Retainer | 0.15 |
| CH430 | 442.8021-01 | Retainer | 0.3 |
| CH440 | 442.7523-01 | Retainer | 0.3 |
| CH660 | 442.8804-01 | Retainer | 0.4 |
| CH870 | 442.9367-01 | Retainer | 1 |
| CH420 | 442.6932-01 | Scraper | 0 |
| CH430 | 442.8022-01 | Scraper | 0.4 |
| CH440 | 442.7524-01 | Scraper | 0.4 |
| CH660 | 442.8805-01 | Scraper | 0.4 |
| CH870 | 452.1264-001 | Scraper | 1 |
| CH880 | 442.9368-01 | Scraper | 0.7 |
| CH86X | BG00498039 | Scraper | 1 |
| CH89X | 452.6114-001 | Scraper | 0.6 |
| CH420 | 452.6842-901 | Eccentric sleeve assembly | 260 |
| CS420 | 452.6884-901 | Eccentric sleeve assembly | 265 |
| CH430 | 452.6537-901 | Eccentric sleeve assembly | 0 |
| CS430 | 452.6572-901 | Eccentric sleeve assembly | 414 |
| CH440 | 452.6444-901 | Eccentric sleeve assembly | 713 |
| CS440 | 452.6489-901 | Eccentric sleeve assembly | 711 |
| CH660 | 452.4128-901 | Eccentric sleeve assembly | 1194 |
| CS660 | 442.4221-901 | Eccentric sleeve assembly | 1212 |
| CH870 | 452.0809-901 | Eccentric sleeve assembly | 0 |
| CH880 | 452.2045-901 | Eccentric sleeve assembly | 2780 |
| 0 | 442.6183-01 | Eccentric steel sleeve | 91 |
| CS420 | 442.9685-01 | Eccentric steel sleeve | 91 |
| CH430 | 442.7921-01 | Eccentric steel sleeve | 152 |
| CS430 | 442.8449-01 | Eccentric steel sleeve | 144 |
| CH440 | 442.7151-01 | Eccentric steel sleeve | 278 |
| CS440 | 442.8068-01 | Eccentric steel sleeve | 266 |
| CH660 | 442.8733-01 | Eccentric steel sleeve | 459 |
| CS660 | 442.8973-01 | Eccentric steel sleeve | 470 |
| CH870 | 452.0540-001 | Eccentric steel sleeve | 820 |
| CH880 | 442.9245-01 | Eccentric steel sleeve | 1050 |
| CH540 | BG00156936 | Eccentric steel sleeve | 140 |
| CH89X | BG01006849 | Eccentric steel sleeve | 1069 |
| CH420 | 442.9657-01 | Eccentric bronze sleeve | 40 |
| CH420 | 442.9658-01 | Eccentric bronze sleeve | 40 |
| CH420 | 442.9659-01 | Eccentric bronze sleeve | 40 |
| CS420 | 442.9686-01 | Eccentric bronze sleeve | 45 |
| CH430 | 442.7923-01 | Eccentric bronze sleeve | 67 |
| CH430 | 452.4191-001 | Eccentric bronze sleeve | 67 |
| CH430 | 442.7924-01 | Eccentric bronze sleeve | 67 |
| CH430 | 452.4192-001 | Eccentric bronze sleeve | 67 |
| CH430 | 442.7925-01 | Eccentric bronze sleeve | 67 |
| CH430 | 452.4193-001 | Eccentric bronze sleeve | 67 |
| CS430 | 442.8486-01 | Eccentric bronze sleeve | 75 |
| CS430 | 452.4516-001 | Eccentric bronze sleeve | 75 |
| CH440 | 442.9643-01 | Eccentric bronze sleeve | 124 |
| CH440 | 442.9642-01 | Eccentric bronze sleeve | 125 |
| CH440 | 442.9406-01 | Eccentric bronze sleeve | 124 |
| CS440 | 442.8067-01 | Eccentric bronze sleeve | 136 |
| CH660 | 442.8824-01 | Eccentric bronze sleeve | 205 |
| CH660 | 442.8825-01 | Eccentric bronze sleeve | 205 |
| CH660 | 442.8826-01 | Eccentric bronze sleeve | 205 |
| CS660 | 442.9033-01 | Eccentric bronze sleeve | 212 |
| CS660 | 442.8972-01 | Eccentric bronze sleeve | 212 |
| CH870 | 452.0805-001 | Eccentric copper sleeve | 418 |
| CH870 | 452.0806-001 | Eccentric copper sleeve | 418 |
| CH870 | 452.0807-001 | Eccentric copper sleeve | 418 |
| CH880 | 442.9357-01 | Eccentric copper sleeve | 588 |
| CH880 | 442.9358-01 | Eccentric copper sleeve | 588 |
| CH880 | 442.9359-01 | Eccentric copper sleeve | 588 |
| CH880 | 442.9360-01 | Eccentric copper sleeve | 588 |
| CH420 | 442.6152-01 | Counterweight | 68.04 |
| CH430 | 442.7926-01 | Counterweight | 105 |
| CH440 | 442.7142-01 | Counterweight | 167 |
| CH660 | 442.8729-01 | Counterweight | 383 |
| CH870 | 452.0516-001 | Counterweight | 435 |
| CH880 | 442.9246-01 | Counterweight | 563 |
| CH420 | 442.6145-01 | Pressure ring | 4 |
| CH430 | 442.7930-01 | Pressure ring | 6 |
| CH440 | 442.7169-01 | Pressure ring | 3.9 |
| CH660 | 442.8743-01 | Pressure ring | 16.6 |
| CH870 | 452.0902-901 | Pressure ring | 30 |
| CH880 | 442.9274-00 | Pressure ring | 29.5 |
| CH420 | 442.6130-01 | Thrust wear ring | 8 |
| CH430 | 442.7927-01 | Thrust wear ring | 13 |
| CH430 | 452.4188-001 | Thrust wear ring | 13 |
| CH440 | 442.7107-01 | Thrust wear ring | 23 |
| CH660 | 442.8761-01 | Thrust wear ring | 25 |
| CH870 | 452.0808-001 | Thrust wear ring | 43.15 |
| CH880 | 442.9249-01 | Thrust wear ring | 50 |
| CH420 | 442.6127-00 | Gear pair | 55 |
| CH430 | 442.7802-00-金腾 | Gear pair | 85 |
| CH430 | 442.7802-00-润恒 | Gear pair | 85 |
| CH440 | 442.7093-00-金腾 | Gear pair | 127 |
| CS440 | 442.7093-00-润恒 | Gear pair | 127 |
| CH660 | 442.8723-00-金腾 | Gear pair | 180 |
| CS660 | 442.8723-00-重庆 | Gear pair | 180 |
| CH870 | 452.0530-901 50Hz | Gear pair | 500 |
| CH870 | 452.0531-901 60Hz | Gear pair | 500 |
| CH880 | 442.9639-00 | Gear pair | 465 |
| CH420 | 857.0328-00 | Gear key | 0.1 |
| CH430 | 442.8011-01 | Gear key | 0.1 |
| CH440 | 442.7171-01 | Gear key | 0.65 |
| CH660 | 442.8807-01 | Gear key | 1 |
| CH870 | 452.1063-001 | Gear key | 0 |
| CH880 | 442.9275-01 | Gear key | 0.95 |
| CH420 | 442.9607-01 | Eccentric copper sleeve key | 1 |
| CH430 | 442.9608-01 | Eccentric copper sleeve key | 0.3 |
| CH440 | 442.9609-01 | Eccentric copper sleeve key | 0.1 |
| CH660/CH870 | 442.9610-01 | Eccentric copper sleeve key | 1.1 |
| CH880 | 442.9469-01 | Eccentric copper sleeve key | 1.6 |
| CH420 | 0 | Hydraulic cylinder assembly | 0 |
| CH430 | 0 | Hydraulic cylinder assembly | 0 |
| CH440 | 452.6390-00 | Hydraulic cylinder assembly | 0 |
| CH660 | 452.4126-901 | Hydraulic cylinder assembly | 1443 |
| CH870 | 452.0953-901 | Hydraulic cylinder assembly | 0 |
| CH880 | 452.1964-901 | Hydraulic cylinder assembly | 4204 |
| CH420 | 442.9872-01 | Hydraulic cylinder | 168 |
| CH430 | 442.7889-01 | Hydraulic cylinder | 249 |
| CH440 | 442.7163-01 | Hydraulic cylinder | 388 |
| CH660 | 442.8722-01 | Hydraulic cylinder | 617 |
| CH870 | 452.0970-001 | Hydraulic cylinder | 1241 |
| CH880 | 442.9980-01 | Hydraulic cylinder | 0 |
| CH880 | 442.9253-01 | Hydraulic cylinder | 0 |
| CH895 | 452.5973-001 | Hydraulic cylinder | 0 |
| CH420 | 442.9873-01 | Hydraulic cylinder sleeve | 24 |
| CH430 | 442.7892-01 | Hydraulic cylinder sleeve | 26 |
| CH440 | 442.7166-01 | Hydraulic cylinder sleeve | 47 |
| CH440 | 442.7166-01T | Hydraulic cylinder sleeve | 44 |
| CH660 | 442.8724-01 | Hydraulic cylinder sleeve | 82 |
| CH870 | 452.0969-001 | Hydraulic cylinder sleeve | 130 |
| CH880 | 442.9256-01 | Hydraulic cylinder sleeve | 194 |
| CH420 | 442.9655-00 | Piston assembly | 0.01 |
| CH420 | 442.9656-01 | Piston | 70.4 |
| CH420 | 442.7559-02 | Piston tube | 0.1 |
| CH430 | 442.9668-00 | Piston assembly | 118 |
| CH430 | 442.9666-01 | Piston | 150 |
| CH430 | 442.7559-01 | Piston tube | 0.1 |
| CH440 | 442.9672-00 | Piston assembly | 186 |
| CH440 | 442.9664-01 | Piston | 186 |
| CH440 | 442.7559-01 | Piston tube | 0.1 |
| CH660 | 442.8758-00 | Piston assembly | 342 |
| CH660 | 442.8738-01 | Piston | 342 |
| CH660 | 442.7559-05 | Piston tube | 0.1 |
| CH870 | 452.1048-901 | Piston assembly | 800 |
| CH870 | 452.0971-001 | Piston | 0 |
| CH870 | 442.7559-06 | Piston tube | 0 |
| CH880 | 442.9243-00/442.9743 | Piston assembly | 0 |
| CH880 | 442.9733-01 | Piston | 923 |
| CH880 | 442.7568-03 | Piston tube | 0.4 |
| CH420 | 442.6139-01 | Piston wear plate | 7 |
| CH420 | 442.6137-01 | Pressure plate | 6.8 |
| CH420 | 442.6138-01 | Main shaft wear plate | 9 |
| CH430 | 442.7893-01 | Piston wear plate | 12.6 |
| CH430 | 442.7894-01 | Pressure plate | 13.1 |
| CH430 | BG00229499 | Pressure plate | 14 |
| CH430 | 442.7895-01 | Main shaft wear plate | 11.5 |
| CH440 | 442.7122-01 | Piston wear plate | 26 |
| CH440 | 442.7121-01 | Pressure plate | 23 |
| CH440 | BG00228541 | Pressure plate | 24 |
| CH440 | 442.7120-01 | Main shaft wear plate | 24 |
| CH660 | 442.8730-01 | Piston wear plate | 37 |
| CH660 | 442.8731-01 | Pressure plate | 43 |
| CH660 | BG00213489 | Pressure plate | 45 |
| CH660 | 442.8732-01 | Main shaft wear plate | 38 |
| CH870 | 452.2630-901 | Thrust triple kit | 190 |
| CH870 | 452.0538-001 | Piston wear plate | 60 |
| CH870 | 452.0537-001 | Pressure plate | 70 |
| CH870 | 452.0507-001 | Main shaft wear plate | 66 |
| CH880 | 452.2631-901 | Thrust triple kit | 291 |
| CH880 | 442.9724-01 | Piston wear plate | 95 |
| CH880 | 442.9722-01 | Pressure plate | 105 |
| CH880 | 442.9723-01 | Main shaft wear plate | 95 |
| CH540 | BG00172883 | Piston wear plate | 14 |
| CH540 | BG00172884 | Pressure plate | 18 |
| CH540 | BG00203610 | Main shaft wear plate | 14 |
| CH550 | BG00214257 | Piston wear plate | 28 |
| CH550 | 452.7145-001 | Pressure plate | 0 |
| CH550 | BG00214258 | Main shaft wear plate | 26 |
| CH860i | 452.7718-001 | Pressure plate | 52 |
| CH420 | 442.6153-01 | V-seal set | 1.2 |
| CH420 | 442.6153-01T | V-seal set | 1.2 |
| CH430 | 442.7897-00 | V-seal set | 0.9 |
| CH430 | 442.7897-00T | V-seal set | 1.5 |
| CH440 | 442.7112-00 | V-seal set | 0.2 |
| CH440 | 442.7112-00T | V-seal set | 1.8 |
| CH660 | 442.8739-00 | V-seal set | 2.25 |
| CH660 | 442.8739-00T | V-seal set | 2 |
| CH870 | 452.0986-901 | V-seal set | 2.7 |
| CH870 | 452.0986-901T | V-seal set | 2.7 |
| CH880 | 442.9257-00 | V-seal set | 3.14 |
| CH880 | 442.9257-00T | V-seal set | 3.2 |
| CH550 | 452.7321-001 | V-seal set | 1 |
| CH420 | 442.6179-01 | Pressure plate | 4.08 |
| CH430 | 442.7896-01 | Pressure plate | 5 |
| CH440 | 442.7167-01 | Pressure plate | 7 |
| CH660 | 442.8725-01 | Pressure plate | 9 |
| CH870 | 452.0990-001 | Pressure plate | 12 |
| CH880 | 442.9304-01 | Pressure plate | 13.87 |
| CH420 | 442.9660-01 | Hydraulic cylinder head | 66 |
| CH430 | 442.9667-01 | Hydraulic cylinder head | 35 |
| CH440 | 442.9663-00 | Hydraulic cylinder head | 120 |
| CH660 | 452.4865-01 | Hydraulic cylinder head | 255 |
| CH660 | 442.8726-001 | Hydraulic cylinder head | 255 |
| CH870 | 452.0972-001 | Hydraulic cylinder head | 570 |
| CH880 | 442.9755-01 | Hydraulic cylinder head | 约770 |
| CH890/895 | 452.5942-001 | Hydraulic cylinder head | 758 |
| CH420/CH430/CH440/CH660 | 442.8783-01 | Plug | 1 |
| CH420 | 442.6627-901 | Horizontal shaft box assembly | 86.64 |
| CH430 | 442.9962-00 | Horizontal shaft box assembly | 165 |
| CH430 | BG00579404 | Horizontal shaft box assembly | 165 |
| CH440 | 442.9966-901 | Horizontal shaft box assembly | 269 |
| CH660 | 452.4127-901 | Horizontal shaft box assembly | 337 |
| CH660 | 442.8847-00 | Horizontal shaft box assembly | 337/350 |
| CH870 | 452.0656-901 | Horizontal shaft box assembly | 805 |
| CH880 | 452.2007-901 | Horizontal shaft box assembly | 920 |
| CH420 | 442.6134-01 | Horizontal shaft box | 50 |
| CH430 | 442.7949-01 | Horizontal shaft box | 89 |
| CH440 | 442.7506-01 | Horizontal shaft box | 125 |
| CH660 | 442.8764-01 | Horizontal shaft box | 201 |
| CH870 | 452.0657-001 | Horizontal shaft box | 430 |
| CH880 | 442.9806-01 | Horizontal shaft box | 473 |
| CH830i/CS830i/CH540/CS540 | BG00481506 | Horizontal shaft box | 0 |
| CH550 | BG00484613 | Horizontal shaft box | 129 |
| CH860/CH865i | BG00137109 | Horizontal shaft box | 373 |
| CH860/865 | BG01222314 | Horizontal shaft box | 0 |
| CH890/895 | BG01236441 | Horizontal shaft box | 472 |
| CH420 | 442.6133-01 | Horizontal shaft | 22 |
| CH430 | 442.9936-01 | Horizontal shaft | 47 |
| CH440 | 442.9937-01 | Horizontal shaft | 75 |
| CH660 | 442.8772-01 | Horizontal shaft | 106 |
| CH870 | 452.0727-001 | Horizontal shaft | 214 |
| CH880 | 442.9807-01 | Horizontal shaft | 229 |
| CH540/CS540 | BG00194893 | Horizontal shaft | 47 |
| CH550/CS550 | 452.6990-001 | Horizontal shaft | 70 |
| CH860/CH865i | 452.7902-001 | Horizontal shaft | 186 |
| CH420 | 442.6144-01 | Inner bearing end cover | 4 |
| CH430 | 442.7951-01 | Inner bearing end cover | 3.5 |
| CH440 | 442.9684-00 | Inner bearing end cover | 4 |
| CH660 | 442.8766-01 | Inner bearing end cover | 7 |
| CH870 | 452.0716-001 | Inner bearing end cover | 0 |
| CH890/CH895 | 442.9261-01 | Inner bearing end cover | 21 |
| CH550 | 452.6991-001 | Bearing cover | 3 |
| CH430 | 442.7950-01 | Outer bearing end cover | 6 |
| CH440 | 442.7133-01 | Outer bearing end cover | 7.3 |
| CH660 | 442.8765-01 | Outer bearing end cover | 9 |
| CH870/CH880 | 442.9260-01 | Outer bearing end cover | 13.87 |
| CH860/CH865i | 452.7911-001 | Outer bearing end cover | 14 |
| CH420 | 442.6148-01 | Outer spacer | 0.45 |
| CH430 | 442.7954-01 | Outer spacer | 0.95 |
| CH440 | 442.7131-01 | Outer spacer | 1.4 |
| CH660 | 442.8771-01 | Outer spacer | 2 |
| CH870/CH880 | 442.9808-01 | Outer spacer | 1.8 |
| CH440 | 442.7130-01 | Inner spacer | 1.8 |
| CH880 | 442.9334-01 | Inner spacer | 2.4 |
| CH865i | 452.8145-001 | Inner spacer | 3 |
| CH890/CH895 | BG01237965 | Inner spacer | 3 |
| CH420 | 442.6213-01 | Gasket | 0.1 |
| CH420 | 442.6214-01 | Gasket | 0.1 |
| CH420 | 442.6214-02 | Gasket | 0.1 |
| CH420 | 442.6214-03 | Gasket | 0.1 |
| CH430 | 442.7957-01 | Gasket | 0.5 |
| CH430 | 442.7956-01 | Gasket | 0.1 |
| CH430 | 442.7956-02 | Gasket | 0.1 |
| CH430 | 442.7953-01 | Gasket | 0.1 |
| CH430 | 442.7953-02 | Gasket | 0.1 |
| CH430 | 442.7953-03 | Gasket | 0.1 |
| CH440 | 442.7134-01 | Gasket | 0.1 |
| CH440 | 442.7135-01 | Gasket | 0.1 |
| CH440 | 442.7135-02 | Gasket | 0.1 |
| CH440 | 442.7136-01 | Gasket | 0.1 |
| CH440 | 442.7136-02 | Gasket | 0.2 |
| CH440 | 442.7136-03 | Gasket | 1 |
| CH660 | 442.8775-01 | Gasket | 0.1 |
| CH660 | 442.8774-01 | Gasket | 0.1 |
| CH660 | 442.8774-02 | Gasket | 0.1 |
| CH660 | 442.8803-01 | Gasket | 0.1 |
| CH660 | 442.8803-02 | Gasket | 0.1 |
| CH660 | 442.8803-03 | Gasket | 0.2 |
| CH870/CH880 | 442.9365-01 | Gasket | 0.04 |
| CH870 | 442.9365-02 | Gasket | 0.04 |
| CH870/CH880 | 442.9364-01 | Gasket | 0.1 |
| CH870/CH880 | 442.9364-02 | Gasket | 0.08 |
| CH870/CH880 | 442.9364-03 | Gasket | 0.16 |
| CH880 | 442.9366-01 | Gasket | 0.04 |
| CH420 | 442.6202-01 | Oil plug | 0.45 |
| CH420/CH430 | 442.2018-01 | Oil plug | 0.2 |
| CH430 | 442.7959-01 | Oil plug | 0.1 |
| CH440 | 442.7577-01 | Oil plug | 0.2 |
| CH660 | 442.8778-01 | Oil plug | 0.3 |
| CH870/CH880 | 442.9346-01 | Oil plug | 0.8 |
| CH420 | 442.6201-01 | Pipe | 0.3 |
| CH440/CH660 | 442.7578-01 | Pipe | 0.1 |
| CH420 | 442.8901-901 | Lower frame wear plate assembly | 0 |
| CH430 | 442.8870-901 | Lower frame wear plate assembly | 0 |
| CH440 | 452.0243-901 | Lower frame wear plate assembly | 0 |
| CH660 | BG00220564新款 | Lower frame wear plate assembly | 0 |
| CS660 | 442.9039-00老款 | Lower frame wear plate assembly | 0 |
| CH870 | 452.1191-902 | Lower frame wear plate assembly | 0 |
| CH880 | 452.0313-901 | Lower frame wear plate assembly | 0 |
| CH420 | 442.8901-00 | Lower frame wear plate assembly | 70.1 |
| CH420 | 442.8902-01 | Lower wear plate | 4.2 |
| CH420 | 442.8902-01T | Lower wear plate | 4.2 |
| CH420 | 442.8903-01 | Lower wear plate | 1.95 |
| CH420 | 442.8903-01T | Lower wear plate | 1.95 |
| CH420 | 442.8904-01 | Lower wear plate | 5 |
| CH420 | 442.8904-01T | Lower wear plate | 5 |
| CH420 | 442.8905-01 | Lower wear plate | 14 |
| CH420 | 442.8905-01T | Lower wear plate | 14 |
| CH420 | 442.8906-01 | Lower wear plate | 12 |
| CH420 | 442.8906-01T | Lower wear plate | 12 |
| CH430 | 442.8870-00 | Lower frame wear plate assembly | 0 |
| CH430 | 442.8864-01 | Lower wear plate | 20 |
| CH430 | 442.8864-01T | Lower wear plate | 20 |
| CH430 | 442.8865-01 | Lower wear plate | 26 |
| CH430 | 442.8865-01T | Lower wear plate | 26 |
| CH430 | 442.8866-01 | Lower wear plate | 10 |
| CH430 | 442.8866-01T | Lower wear plate | 10 |
| CH430 | 442.8867-01 | Lower wear plate | 4 |
| CH430 | 442.8867-01T | Lower wear plate | 4 |
| CH430 | 442.8868-01 | Lower wear plate | 5 |
| CH430 | 442.8868-01T | Lower wear plate | 5 |
| CH430 | 442.8869-01 | Lower wear plate | 2.2 |
| CH430 | 442.8869-01T | Lower wear plate | 2.2 |
| CH440 | 442.8799-00 | Lower frame wear plate assembly | 0 |
| CH440 | 442.8794-01 | Lower wear plate | 20.6 |
| CH440 | 442.8794-01T | Lower wear plate | 20.6 |
| CH440 | 442.8798-01 | Lower wear plate | 21.5 |
| CH440 | 442.8798-01T | Lower wear plate | 21.5 |
| CH440 | 442.8797-01 | Lower wear plate | 8.8 |
| CH440 | 442.8797-01T | Lower wear plate | 8.8 |
| CH440 | 442.8796-01 | Lower wear plate | 2.2 |
| CH440 | 442.8796-01T | Lower wear plate | 2.2 |
| CH440 | 442.8795-01 | Lower wear plate | 9.5 |
| CH440 | 442.8795-01T | Lower wear plate | 9.5 |
| CH440 | 452.0239-001 | Lower wear plate | 24.5 |
| CH440 | 452.0239-001T | Lower wear plate | 24.5 |
| CH440 | 452.0238-001 | Lower wear plate | 15 |
| CH440 | 452.0238-001T | Lower wear plate | 15 |
| CH660 | 452.7283-001 | Lower wear plate | 51 |
| CH660 | 452.7283-001T | Lower wear plate | 51 |
| CH660 | 452.7285-001 | Lower wear plate | 55 |
| CH660 | 452.7285-001T | Lower wear plate | 55 |
| CH660 | 452.7288-001 | Lower wear plate | 51 |
| CH660 | 452.7288-001T | Lower wear plate | 51 |
| CH660 | 452.7289-001 | Lower wear plate | 59 |
| CH660 | 452.7289-001T | Lower wear plate | 59 |
| CH660 | 452.7291-001 | Lower wear plate | 55 |
| CH660 | 452.7291-001T | Lower wear plate | 55 |
| CH660 | BG00207523 | Bolt assembly | 0 |
| CH660 | 891.2134-901T | Observation door | 0 |
| CS660 | Old model wear-resistant lining plate set | Lower frame wear plate assembly | 319 |
| CS660 | 442.9040-01 | Lower wear plate | 18.6 |
| CS660 | 442.9040-01T | Lower wear plate | 18.6 |
| CS660 | 442.9041-01 | Lower wear plate | 15.4 |
| CS660 | 442.9041-01T | Lower wear plate | 15.4 |
| CS660 | 442.9042-01 | Lower wear plate | 22 |
| CS660 | 442.9042-01T | Lower wear plate | 22 |
| CS660 | 442.9043-01 | Lower wear plate | 32 |
| CS660 | 442.9043-01T | Lower wear plate | 32 |
| CH870 | 452.1191-901 | Lower frame wear plate assembly | 563 |
| CH870 | 452.2373-002 | Lower wear plate | 17 |
| CH870 | 452.2373-002T | Lower wear plate | 17 |
| CH870 | 452.2373-003 | Lower wear plate | 16 |
| CH870 | 452.2373-003T | Lower wear plate | 16 |
| CH870 | 452.2373-001 | Lower wear plate | 17 |
| CH870 | 452.2373-001T | Lower wear plate | 17 |
| CH870 | 452.2366-001 | Lower wear plate | 49 |
| CH870 | 452.2366-001T | Lower wear plate | 49 |
| CH870 | 452.2365-001 | Lower wear plate | 54 |
| CH870 | 452.2365-001T | Lower wear plate | 54 |
| CH880 | 452.0313-905 | Lower frame wear plate assembly | 738 |
| CH880 | 452.0312-001 | Lower wear plate | 53.5 |
| CH880 | 452.0312-001T | Lower wear plate | 53.5 |
| CH880 | 452.0427-001 | Lower wear plate | 42 |
| CH880 | 452.0427-001T | Lower wear plate | 42 |
| CH880 | 452.0322-001 | Lower wear plate | 19.5 |
| CH880 | 452.0322-001T | Lower wear plate | 19.5 |
| CH880 | 452.0428-001 | Lower wear plate | 34 |
| CH880 | 452.0428-001T | Lower wear plate | 34 |
| CH880 | 452.0322-002 | Lower wear plate | 19.5 |
| CH880 | 452.0322-002T | Lower wear plate | 19.5 |
| CH880 | 452.0321-001 | Lower wear plate | 17 |
| CH880 | 452.0321-001T | Lower wear plate | 17 |
| CH880 | 452.0321-002 | Lower wear plate | 17 |
| CH880 | 452.0321-002T | Lower wear plate | 17 |
| CH420 | 442.9574-00 | Hopper | 159 |
| CH430 | 442.7985-00 | Hopper | 205 |
| CS430 | 442.8529-01 | Hopper | 0 |
| CH440 | 442.7191-90 | Hopper | 355 |
| CH660 | 442.5621-00 | Right side distributor | 62 |
| CH660 | 442.5621-90 | Left side distributor | 62 |
| CS660 | 442.8978-00 | Hopper | 0 |
| CS660 | 442.8978-00T | Hopper | 0 |
| CH420 | 442.9575-00 | Hopper | 40 |
| CH420 | 442.9606-00 | Hopper | 0 |
| CH420 | 442.9606-00T | Hopper | 0 |
| CH430 | 442.7986-00T | Hopper | 40 |
| CH430 | 442.7986-90T | Hopper | 42 |
| CH430 | 442.8007-00T | Hopper | 40 |
| CH430 | 442.8007-90T | Hopper | 40 |
| CH440 | 442.7192-00 | Hopper | 0 |
| CH440 | 442.7192-90 | Hopper | 0 |
| CH440 | 442.8159-00T | Hopper | 60 |
| CH440 | 442.8159-90T | Hopper | 60 |
| CH440 | 442.8030-00T | Hopper | 0 |
| CH440 | 442.8030-90T | Hopper | 0 |
| CH440 | 442.8105-00 | Feed hopper | 756 |
| CH660 | 442.9044-00 | Hopper | 0 |
| CH660 | 442.9044-90 | Hopper | 0 |
| CH660 | 442.9045-00T | Hopper | 0 |
| CH660 | 442.9045-90T | Hopper | 0 |
| CH880 | 442.9791-00 | Hydraulic system | 0 |
| CH420/CH430/CH440 | 442.8624-00 | Check valve | 26 |
| CH420/CH430/CH440/CH660 | 442.8777-00T | Check valve | 25 |
| CH420/CH430/CH440/CH660 | 442.8777-00 | Check valve | 25 |
| CH420 | 442.6162-01 | Gasket | 0 |
| CH440 | 442.9949-00 | Belt drive 4-stage 50HZ | 0 |
| CH660 | 442.0275-00 | Spindle assembly transport frame | 0 |
| CH660 | 442.5904-01 | Fixed plate | 18.7 |
| CH660/CS660 | 452.4574-001 | Stop block | 0 |
| CH660 | 452.4132-901 | Hopper assembly | 0 |
| CH420 | 879.0322-00 | Main unit side belt pulley | 43 |
| CH420 | 869.0221-00 | Taper lock bushing - main unit | 9 |
| CH420 | 869.0187-00 | Taper lock bushing - motor | 9 |
| CH420 | 869.0189-00 | Taper lock bushing - motor | 0 |
| CH420 | 869.0188-00 | Taper lock bushing - motor | 0 |
| CH420 | 869.0258-00 | Taper lock bushing - motor | 0 |
| CH420 | 875.0243-00 | V-belt | 0 |
| CH420 | 875.0285-00 | V-belt | 0 |
| CH420 | 879.0343-00 | Motor side belt pulley | 38 |
| CS420/CH430 | 875.0323-00 | V-belt | 0 |
| CS420 | 875.0247-00 | V-belt | 0 |
| CH430 | 879.0437-00 | Main unit side belt pulley | 0 |
| CH430 | 879.0261-00 | Motor side belt pulley | 0 |
| CH430 | 875.0244-00 | V-belt | 0 |
| CH440 | 879.0359-00 | Main unit side belt pulley | 0 |
| CS440 | 879.0511-00 | Motor side belt pulley | 0 |
| CH440 | 869.0235-00 | Taper lock bushing - main unit | 0 |
| CH440 | 869.0261-00 | Taper lock bushing - motor | 18 |
| CH440 | 869.0278-00 | Taper lock bushing - motor | 18 |
| CH440 | 869.0295-00 | Taper lock bushing - motor | 17 |
| CH440 | 869.0283-00 | Taper lock bushing - motor | 0 |
| CH440/CH660/CS660 | 869.0286-00 | Taper lock bushing - motor | 0 |
| CH440 | 869.0314-00 | Taper lock bushing - motor | 16 |
| CH440 | 875.0276-00 | V-belt | 0 |
| CH440 | 875.0249-00 | V-belt | 0 |
| CH440 | 879.0496-00 | Main unit side belt pulley | 100 |
| CH440 | 875.0245-00 | V-belt | 0 |
| CH660 | 879.0497-00 | Main unit side belt pulley | 0 |
| CH660 | 879.0499-00 | Motor side belt pulley | 0 |
| CH660/CS660 | 869.0418-00 | Taper lock bushing - motor | 0 |
| CH660/CS660 | 875.0246-00 | V-belt | 0 |
| CH660 | 875.0269-00 | V-belt | 0 |
| CH660/CS660 | 879.0820-00 | Main unit side belt pulley | 0 |
| CS660/CS660 | 879.0521-00 | Main unit side belt pulley | 193 |
| CS660 | 879.0522-00 | Motor side belt pulley | 121 |
| CH880 | 875.0254-00 | V-belt | 0 |
| CH/S420 | BG00236428 | Cover | 9 |
| CH870I | BG00572822 | Support ring | 428 |
| CH870 | 800.0518-00 | Plate | 1.35 |
| CH870 | 800.0518-00T | Plate | 1.35 |
| CH870i/CH890i/CH895i | BG00733121 | Gasket | 1.2 |
| CH89X | BG00209587 | Wear plate assembly | 0 |
| CH895 | BG00283947 | Cover | 198 |
| CH860/865 | 452.7640-901 | Press ring | 21 |
| CH860/CH865i | BG00234474 | Gasket | 1 |
| CH860/CH865i | BG00227011 | Wear plate | 47 |
| CH860/CH865i | BG00227012 | Wear plate | 50 |
| CH860/CH865i | BG00227010 | Wear plate | 49 |
| CH860/CH865i | BG00227009 | Wear plate | 45 |
| CH860/CH865i | BG00227007 | Wear plate | 50 |
| CH860/CH865i | BG00227008 | Wear plate | 46 |
| CH865i | 452.7691-001 | Wear plate | 2 |
| CH860/CH865i | BG01290933 | Support ring | 4.1 |
| CH860/CH865i | BG01393952 | Spacer ring | 0.6 |
| CH860/CH865i | 452.8120-001 | Bearing cover | 2 |
| CH860/CH865i | 452.8122-001 | Locking ring | 15 |
| CH550 | 891.2879-001 | Washer | 0 |
| CH430/CS430 | BG00514356 | Spindle cover | 0 |
| CH440 | BG01122286 | Lower frame transport frame | 0 |
| CH840i | 452.7698-001 | Spacer sleeve | 1 |
| CH440 | 442.8159-00 | Hopper | 60 |
| CH440 | 442.8159-90 | Hopper | 60 |
| CH865i | 452.7688-901 | Divider | 78 |
| CH880 | 452.3682-901 | Hopper | 1362 |
| CH880 | 442.9738-00 | Hopper | 166 |
| CH865i/CH870i/CH890i | 452.4315-901 | Flange bracket | 2.7 |
| CH870 | 452.0799-901 | Lower hopper assembly | 0 |
| CH420/CS420 | BG00514478 | End cover | 2 |
| CH870 | BG00733104 | Sleeve | 0.8 |
| CH880 | 452.1068-001 | Fixing block | 6.5 |
| CH880 | 452.6722-001 | Gasket | 0 |
| CH870i | 452.1426-001 | Bracket | 1 |
| CH870i | 452.1448-001 | Bracket | 2 |
| CH870i | 452.1449-001 | Bracket | 1 |
| CH870i | 452.1589-001 | Cover | 0 |
| CH870i | 452.1590-001 | Cover | 0 |
| CH870i | 452.1591-001 | Cover | 0 |
| CH870i | 452.1592-001 | Cover | 0 |
| CH870i | 452.1622-901 | Spacer sleeve | 7 |
| CH860/865 | 452.8201-001 | Ring | 19.2 |
| CH660/CS660 | BG00573541 | Leg | 81 |
| CH660/CS660 | BG00573452 | Leg | 81 |
| CHS420/430 | 442.6956-00 | Control pump assembly | 25.86 |
| CH430 | 442.9779-00 | Upper plate of vibration damping pad | 5 |
| CH660/CS660 | 891.1772-901 | Lower frame guard plate assembly | 147 |
| CH660/CS660 | 891.1891-901 | Guard plate | 12 |
| CH660/CS660 | 891.1893-901 | Guard plate | 12 |
| CH660/CS660 | 891.1858-901 | Guard plate | 15 |
| CH660/CS660 | 891.1860-901 | Guard plate | 13 |
| CH660/CS660 | 891.1889-901 | Guard plate | 15 |
| CH660/CS660 | 891.1856-901 | Guard plate | 13 |
| CH880 | 442.9750-01 | Rubber plate | 24 |
| CH/S420 | BG00208806 | Pressure plate | 8 |
| CH440 | 923.0422-00 | Feeler gauge | 0 |
| CH430 | YE2-315L1-4-132KW-380V（轴径80） | Motor | 0 |
| CH430 | CH430液压站 | Hydraulic station | 0 |
| CH865iCH890i/CH895i | 452.6069-001 | Round bar | 1 |
| CH890/CH895 | 452.6103-001 | Rubber plate | 21 |
| CH890/CH895 | 452.6166-001 | Rubber plate | 13 |
| CH/S440 | BG00237121 | Upper arm frame bushing | 65 |
| CH660 | BG00491449 | Protective cover | 33 |
| CH660 | BG00528949 | Protective cover | 34 |
| CH880 | 442.9396-00 | Bend pipe | 3.5 |
| CH660 | 452.4202-901 | Material trough | 49 |
| CH870i | BG00865644 | Gasket | 0.2 |
| CH870i | BG01241696 | Gasket | 0.1 |
| CH870i/CH890i/CH895i | BG00874339 | Spacer ring | 0.9 |
| CH550 | BG00484670 | Bearing cover | 12 |
| CH550 | 452.7091-001 | Spacer ring | 0.03 |
| CH550 | BG00484767 | Plug | 0 |
| CH860 | BG00137944 | Gasket | 0 |
| CH860 | BG00137989 | Gasket | 0 |
| CH860 | BG00137990 | Gasket | 0.1 |
| CH860 | BG00137991 | Gasket | 0.1 |
| CH870 | 452.0792-901 | Hopper | 113 |
| CH870i | BG00528798 | Retaining ring | 38 |
| CH540 | BG00244648 | Rubber hopper | 149 |
| CH870i | 891.1149-001 | Rubber pad | 0.023 |
| CH890/CH895 | 452.6131-001 | Lock nut | 0 |
| CH890/CH895 | 452.6130-001 | Measuring tube | 7 |
| CH420/CH660 | BG00368222 | 0 | 12 |
| CH890/CH895 | 452.6169-001 | Bracket | 5 |
| CH895 | 452.6139-001 | Flange plug | 7 |
| CH880 | 442.9747-01 | Rubber plate | 33 |
| 0 | 442.7568-04 | Measuring tube | 0.4 |
| CH420 | 442.6644-01 | Mounting plate | 4 |
| CH890/CH895 | BG00605797 | 0 | 224 |
| 0 | 452.8324-001 | Mounting plate | 24 |
| CH890/CH895 | 452.5430-001 | Spacer sleeve | 2 |
| CH870i | BG00868371 | Seat ring | 20 |
| CH870/890/895 | BG01178805 | Spacer | 3 |
| CH420/CH430 | 442.6407-01 | Base | 1 |
| 未知机型 | 442.8785-00 | Plate | 2.3 |
| H420/CH430 | 442.6508-00 | Connector | 13 |
| CH870i | 452.1296-001 | Rubber pad | 17 |
| CH/S440 | 442.7281-00 | Sling for 440 frame copper bushing | 8.5 |
| CH/S440 | 442.7283-00 | Sling for 440 eccentric copper bushing | 5.5 |
| CH890/CH895 | BG01241953 | Seal | 4.2 |
| CH440 | BG00362732 | Manual hydraulic pump | 0 |
| CH420/CS420 | 453.0565-00 | Base frame assembly | 306 |
| CH540 | BG00583004 | Bracket | 0 |
| CS420 | 442.8398-00 | Cover | 0 |
| CS420 | 442.6812-00 | Conical feed hopper | 25 |
| CS420 | 448.3663-02 | Gasket | 0 |
| CH/S440 | 442.0191-01/650.0191-01 | Pin | 0 |
| CS420 | 442.6813-01 | Bracket | 0 |
| CS420 | BG00309826 | Cover | 1 |
| CS420 | BG00309922 | Bracket | 0.7 |
| CS420 | BG00309947 | Bracket | 1.72 |
| CS420 | BG00309948 | Bracket | 2.68 |
| CS420 | BG00311314 | Plate | - |
| CS420 | BG00300483 | Bolt | 0 |
| CH660 | 452.4214-001 | Material chute | 52 |
| CH550 | 452.7612-001 | Sealing ring | 5 |
| CH420/CS420 | 442.9994-00 | Piston retainer | 1.2 |
| CH/S430 | 442.8042-00 | Sling | 4 |
| CH440 | 442.8043-00 | Sling | 4 |
| CH430 | 442.8044-01 | Eye bolt | 0.6 |
| CH420/CS420 | 442.8625-00 | Protective device | 4 |
| CS660 | 452.5917-001 | Pin | 0.9 |
| CH860/CH865i | 442.9979-01 | Gasket | 0.2 |
| CH430 | 442.0800-90 | Lead block | 0.3 |
| CH880 | 458.0772-00 | Seal strip guide | 569 |
| CH660 | 891.1903-901 | Rubber liner | 6.9 |
| CH870 | 442.9809-01 | Wear ring | 0.5 |
| CH860/CH865i | BG00510148 | Baffle plate | 0.4 |
| CH/CS420/430 | 442.8396-00 | Protective cover | 0 |
| CH860/865 | 452.7763-001 | Main shaft inner nut | 31 |
| CH860 | BG01476726 | Gasket | 1 |
| CH860 | BG01366402 | Nut | 0 |
| CH860 | BG01477176 | Double-ended stud | 0 |
| CS420 | 453.0560-00 | Motor frame | 130 |
| CS420 | BG00311482 | Plate | 0 |
| CS420 | BG00309786 | Pulley protective cover | 27 |
| CS420 | 442.6811-90 | Hopper assembly | 184 |
| CH430 | 458.0493-01 | Bracket | 0 |
| CH870i | BG00574012 | Rubber plate | 20.75 |
| CH870i | BG00574356 | Rubber plate | 21 |
| CH870i | BG00573949 | Hopper | 108 |
| CH870i | BG00573994 | Hopper | 108 |
| CH540 | 452.7685-001 | Spacer | 0.02 |
| CH860/865 | 452.8262-001 | Wear plate | 9 |
| CH860/CH865i/CH870i/CH890i | BG00206187 | Dowel pin | 1 |
| CH420 | BG00566825 | Lower frame assembly | |
| CH660 | BG00259473 | Thrust set (three pieces) | |
| 912.0126-00 | Filter element | ||
| CG820 | 454.2559-001 | Lower frame bushing | |
| CG820 | 454.2587-001 | Lower frame bushing | |
| CG820 | 454.2834-901 | Square head bolt | |
| CG820 | 454.5154-001 | Temperature sensor | |
| CH660 | 452.3272-901 | Main shaft assembly | |
| 442.8982-02 | |||
| 442.9230-02 | |||
| 442.9072-90 | |||
| 442.9071-90 | |||
| 452.3822-902 | |||
| 442.7230-03 | |||
| 442.8418-03 | |||
| 442.8419-01 | |||
| 442.9073-01 | |||
| BG00496465 | |||
| 912.0155-0 | |||
| BG00514564 | Sensor | ||
| CH420 | 442.6127-01 | Gear pair | |
| CH420 | 442.9554-00 | Upper frame body | |
| CH420 | 442.9568-01 | Arm frame guard plate | |
| CH420 | 442.9871-00 | Lower frame body | |
| CH420 | 442.6153-00 | V-shaped seal |
Applications
Mining and ore processing: primary crushing of iron ore, copper ore, gold ore, and other hard ores
Quarry and aggregate production: granite, basalt, limestone, river stone, and similar materials
Construction waste recycling: concrete rubble and mixed demolition material
Infrastructure projects: aggregate supply for highways, railways, and commercial concrete
Final configuration depends on feed material, required output, discharge size, and site conditions. Please confirm with our technical team before ordering.
About Us
Shenyang Zhuoyue Machinery Equipment Co., Ltd. manufactures crushing equipment and replacement components for mining, quarrying, and aggregate applications.
Production base: approximately 4,000 m²
Machining lines: 10
Welding lines: 2
Assembly lines: 2
R&D and technical personnel: 24
Annual production capacity: approximately 2,000 tons
Manufacturing services: drawing-based machining, sample-based manufacturing, OEM/ODM, non-standard component production
Technical requirements are confirmed before production based on the crusher model, application data, drawings, or samples. Inspection records and material documentation can be provided according to order requirements.
Quality Control
Each part is inspected against the approved drawing and confirmed technical requirements before shipment.
Incoming material
Material grade verified by spectrochemical analysis or certificate review
Chemical composition according to ASTM E415 or GB/T 223 where required
Visual inspection of castings and forgings for surface defects
Manufacturing
Critical dimensions measured against approved drawing; general tolerances per ISO 2768-1 where individual tolerances are not specified
Thread dimensions checked with thread gauges
Hardness verified per ISO 6506-1 / ASTM E10 (Brinell) or ISO 6508-1 / ASTM E18 (Rockwell) where specified
Mechanical properties per ISO 6892-1 where required
Impact toughness per ISO 148-1 where specified
Pre-shipment
Final dimensional and visual inspection
Assembly compatibility check where required
Documentation prepared according to order requirements
Documentation and traceability
Material certificate, dimensional inspection report, heat treatment record, thread inspection record, and assembly check record where applicable
Batch traceability covers raw material batch, production batch, heat treatment batch, and inspection record
Third-party inspection by SGS, Bureau Veritas, or a customer-appointed inspector can be arranged on request
What Information Is Needed for a Quotation
To provide an accurate quotation, please provide as much of the following as available:
Crusher brand and model
OEM or reference part number
Existing part photos or measurements
Drawing, if available
Material requirement, if specified
Quantity required
Delivery destination
Any special inspection or documentation requirements
If the original drawing is unavailable, existing parts can be measured and cross-checked to confirm the required dimensions.
Order Process
Send equipment and part information — model, part number, photos, measurements, or existing parts
Technical review — mating dimensions and material requirements confirmed
Technical confirmation — dimensions, material, heat treatment, inspection requirements, quantity, and delivery confirmed
Production — according to the confirmed technical baseline
Pre-shipment inspection — inspection records provided according to order requirements
Shipping and documentation — export packaging and shipping documents prepared according to agreed trade terms
Packaging and Delivery
Small components: wooden cases
Large components: steel-frame packaging with protective foam and waterproof film
Machined surfaces: anti-rust protection applied before shipment
Documentation: packing list, inspection records, and shipping documents according to order requirements
Trade terms: EXW, FOB, and other terms by agreement.
FAQ
Q1: Can you supply the moving jaw, clamp rod, copper bushing, and lock nut as a matched set?
A: Yes. We can produce them against one confirmed dimensional baseline so the mating dimensions and assembly clearance are consistent. This reduces the risk of parts from different sources not fitting together.
Q2: What if I only need one part, not the full set?
A: Single-part orders are supported. If you already have the mating parts, please provide their dimensions or photos so we can confirm the fit.
Q3: What if I don't have the original drawing?
A: Existing parts can be measured and cross-checked against each other. Photos and key dimensions can also be used. A dimensional baseline is confirmed with you before production.
Q4: How do you control thread fit between the clamp rod and lock nut?
A: Thread pitch, major diameter, and thread form are measured and checked with thread gauges. The lock nut thread is matched to the clamp rod thread.
Q5: What is the minimum order quantity?
A: Standard parts: MOQ 1 piece. Customized or non-standard parts: MOQ confirmed according to the part and process.
Q6: What is the lead time?
A: Lead time depends on the part, material, and production schedule.
Standard parts with confirmed dimensions: 30 days after order confirmation.
Customized or non-standard parts: 30–45 days after drawing or dimensional confirmation.
Emergency replacement: 7–10 days for selected standard parts, subject to stock status.
Long-term framework agreement with reserved material: 7–10 days after order confirmation.
The final delivery date is confirmed in the order.
Q7: What is the warranty?
A: Manufacturing defects are covered for 12 months from delivery or commissioning, whichever is confirmed in the sales agreement. Wear parts are excluded unless otherwise agreed. During the warranty period, remote technical support and replacement coordination are provided for confirmed quality issues.
Q8: Do you provide installation support?
A: Remote technical support is available during installation. On-site support can be arranged on request; travel and accommodation costs are discussed separately.
