1.​‍​‌‍​‍‌ Final Sealing Defense - This sealing technology has been engineered to resist highly abrasive dust and the penetration of mineral slurry in the case of high-impact crushing. 2. Extra-Soft Elastic Rubber - Special formulation of soft rubber materials is used for cone crushers that will be subjected to heavy duty high-vibrations without developing any dynamic fatigue cracks while keeping on their elasticity over the time period. 3. Dimensional Accuracy - The ISO 7874 conformity was ensured through three-axis machine measurements, cross-section tolerance ± 0.08mm, and optical drawing validation techniques. 4. Retrofitted Original Equipment: We offer solutions to customers who do not have an alternative to replace original machine equipment socket seals because parts in question are either discontinued, non-standard, or highly worn-out. 5. Quality Guarantee of 12 Months: The 12 months warranty on all our custom-sealed parts is supported by the batch Material Testing Reports ​‍​‌‍​‍‌(MTR).

1.​‍​‌‍​‍‌ The process of manufacturing involves arranging manufacturing techniques e.g. forging, heat treatment and machining to the finest detail, based on confirmed material drawings and technical requirements. 2. They produce the parts in accordance with the crusher model, the OEM part number, drawing, or sample; and they also support the production of special parts and customized main shafts. 3. The major manufacturing phases are verified as against the approved specification, which includes checking material correctness, important sizes, precision of machining, and final inspection prior to ​‍​‌‍​‍‌dispatch.

Designed​‍​‌‍​‍‌ of wear-resistant alloy material with carefully controlled heat treatment to guarantee dependable performance under continuous impact and abrasion. Manufactured to exacting standards and machined to fit perfectly with the verified crusher model, technical blueprint, or part number to ensure an accurate installation and steady operation. We work with standard and special sizes, OEM customization is also possible. Small and large orders are accepted. We have quality control at every stage of the process including raw materials, dimensions, machining, and performance. Inspection reports, as well as, material certificates can be obtained upon ​‍​‌‍​‍‌request.

1. Hex, Hammer Head & Custom Bolt Options 2. Replacement Matching Based on Drawings, Samples, Photos or Measurements 3. 1080MPa Tensile Strength, HRC42–48 Hardness & ±0.01mm Thread Precision

1.​‍​‌‍​‍‌ Customized locking bolts are manufactured in line with the different models of the crusher, parts numbers, detailed drawings, samples, photographs, or by measurement. 2. The diameter, pitch, and length of the thread and the tightening dimension will be agreed upon prior to manufacturing, and, in cases of the thread, its tolerance will either be ISO 6g or customer's choice. 3. Heat treatment requirement and hardness inspection shall be carried out as per customer ​‍​‌‍​‍‌specification.

1.​‍​‌‍​‍‌ ±0.015​‍​‌‍​‍‌ mm CNC machining precision: A very level surface machining makes it possible to install the product without having to do on-site grinding, shimming, or adjustment ​‍​‌‍​‍‌work. 2. It​‍​‌‍​‍‌ is very important because of the fact that dust particles which might go into the machinery are of a very fine nature while those from lubricating the oil side is a different matter as far as the design and construction of this ​‍​‌‍​‍‌machine. 3. It​‍​‌‍​‍‌ is very important because of the fact that dust particles which might go into the machinery are of a very fine nature while those from lubricating the oil side is a different matter as far as the design and construction of this ​‍​‌‍​‍‌machine. 4. 30-Day​‍​‌‍​‍‌ Delivery from Factory: All the precision work manufacturing and the preparation of seaworthy export packing will be completed within 30 days from drawing confirmation and order ​‍​‌‍​‍‌placement.

1.​‍​‌‍​‍‌ Precision Profile Reconstruction: We reverse-engineer worn, distorted, or missing OEM seals by means of 3D profile analysis and optical measurement, and then we are able to restore original dimensions with high accuracy. 2. Engineered Elastomer Compound: The compound is developed with the use of high-rebound and water resistant polyurethane. The main function of this material is to withstand wear and tear from heavy mining machinery. This includes the resistance against fatigue, tearing, and mechanical wear in the operating temperature range of -35 to +110 degree Celsius that can withstand the short-term maximum of 120 degrees. 3. Tight CNC Machining Tolerances: We precision-turn the seals on CNC lathes to within strict +-0.03mm tolerance. This tight tolerance allows for a proper interference fit that prevents mineral dust ingress while minimizing friction and avoiding damage to the shafts. 4. Predictable Delivery: The flexible nature of our manufacturing processes enables us to deliver standard profiles as well as custom orders within an average of 7 to 15 working days ​‍​‌‍​‍‌respectively.

1. Integral Forging & Stress Relief Finite element optimized structure for high rigidity and deformation resistance. 2. Micron-Level Assembly Tolerance ±0.02 mm, flatness 0.015 mm, precise component matching. 3. Customization & Capacity Mass production, non-standard customization, OEM/ODM, up to 150 tons per piece. 4. Quality & Global Service Static and dynamic load testing, dimensional calibration, one-stop service.

Our​‍​‌‍​‍‌ Cone Crusher Thrust Bearings and Thrust Pads are specially formulated for the most challenging crushing environments, such as mining, quarrying and aggregate operations. Made out of the finest selected alloy metals with additives of copper, they not only carry the heavy loads on their shoulders in a quite a balanced way, but also help keep the friction at minimum level and provide excellent resistance to the wearing effects of the operating conditions. Every detail of each part is produced either as per our own drawings or as a replacement part for OEM. We carry out the checking of dimensions, flatness, parallelism and the finishing surface of the thrusts as standard. Our thrust bearings range includes both the ordinary and non-standard types meant for different types of crusher models backed by technical verification, quality-control documentation and supply guarantee in terms of quality and ​‍​‌‍​‍‌batches.